518 Matching Results

Search Results

prev Results: 73 - 96 next

[Surveyor's transit]

Description: Surveyor's transit, mounts with spring-action pin to tripod (1999.012.001b). Face is engraved with cardinal directions, with a star replacing North. Two bubble levels built into face. Degrees and minutes marked around circumference of face. Dial on side changes display on face to read numbers between 1 and 16. Manufacturer: T.F. Randolph, Cincinnati, Ohio. Patent date June 24, 1879. Scope mounts to compass body with screw pins from underneath. Needle tightens by screw action on "W" side… more
Date: 1880
Partner: Fort Bend Museum

[Red wooden station staff]

Description: Red wooden station staff to surveyor's transit set. Round staff is capped at base with pointed iron end piece. Brass tip at top swivels. The object is called a "Jacob's Staff" and is used by surveyors to support a compass. The pointed end is jabbed into the ground and the compass is attached to the threaded piece at the top. The ball at the top allows the compass to be levelled.
Date: 1880
Partner: Fort Bend Museum

[Fishing rod]

Description: Fishing rod that has a long yellowish-white rod with five [Blank] attached with yellow and black [Blank]. The handle is green painted metal. The cork grip is missing, mostly likely rotted off. The reel is a cylinder shape and is silver in color. It has four thin bars separating the two flat ends of the reel, and one big bar, the spool in the center with cloth string wrapped around it. One side has a crank for winding the string. It has yellow handles that have been painted black.
Date: 1960
Partner: Fort Bend Museum

[Iron with a wooden handle]

Description: It is made of iron, but is plated with a silver unknown metal. Above the back of the iron is a plug in for a cord. The handle is wood and has been burned underneath. The handle is bolted to the iron.
Date: 1910
Partner: Fort Bend Museum

[Hoof rasp]

Description: Hoof rasp that is rectangular and flat. The bottom has small diamond-shaped teeth. The sides are horizontal. The top has big wedge teeth. The handle is long and skinny, but bent far over.
Date: 1890
Partner: Fort Bend Museum

[Strop with a wooden core]

Description: Strop with a wooden core two padded leather sides parallel to each other, one side is unpadded leather, and the fourth side is inset with a hone. One of the padded sides has a 6 cm hole exposing cotton, same side is missing three nails and is torn.
Date: 1895
Partner: Fort Bend Museum

[Soldering iron]

Description: Soldering iron with a copper plated head, four sided with a pyramid point, with an octagonal body of head. At the back of the head there is a long painted black iron neck that has been inserted into the head. The neck ends in a point. The wooden handle is removable and fits over the pointed end of the neck. It is a turned handle that split in half and been repaired with black electrical tape. There is also metal wire wrapped around the base of the handle where the split originated. Three … more
Date: 1895
Partner: Fort Bend Museum

[Rusty Pliers]

Description: Pliers that are hinged at top and then has four textured holes, and then has parallel handles of which one ends in a clasp that hooks the two handles together. On the handle without a clasp, written on the inside, is "M KLEIN & SONS"
Date: 1895
Partner: Fort Bend Museum

[Stanley Bailey No. 28 transitional fore plane]

Description: Stanley Bailey No. 28 transitional fore plane. Has a beech wood stock with what looks similar to an iron plane screwed to the top. The front of the iron setting starts 5.2 cm from the face/sole and ends 6.2 cm before the heel. Between the iron and wood is a thin wooden board that has been cut into the shape of the iron piece. At the front of the iron is a mushroom shaped knob which is screwed on. The iron is not very wide here but gets wider towards the center where it takes on a rectangul… more
Date: 1885
Partner: Fort Bend Museum

[Natural wicker sewing stand]

Description: Natural wicker sewing stand with curved legs and a rectangular bottom basket and a top basket. Original paper label underneath top basket reads "NO".
Date: unknown
Partner: Fort Bend Museum

[Pink velvet upholstered side chair]

Description: Pink velvet upholstered side chair. Carved bow decoration at crest of back. Supposedly was original to McFarlane House.
Date: unknown
Partner: Fort Bend Museum

[Pink velvet upholstered settee]

Description: Pink velvet upholstered settee. Carved bow decoration at crest of back. Supposedly was original to McFarlane House.
Date: unknown
Partner: Fort Bend Museum

[Wooden chest with iron fixtures]

Description: Wooden chest with iron fixtures. The top is covered with a sheet of tin fastened with nails around the perimeter. Handles on either side of the box. Box is hand made, and seems designed to have an inner shelf. EMPTY.
Date: unknown
Partner: Fort Bend Museum

[Pink velvet upholstered side chair]

Description: Pink velvet upholstered side chair. Carved bow decoration at crest of back. Supposedly was original to McFarlane House.
Date: unknown
Partner: Fort Bend Museum

[Pink velvet upholstered side chair]

Description: Pink velvet upholstered side chair. Carved bow decoration at crest of back. Supposedly was original to McFarlane House.
Date: unknown
Partner: Fort Bend Museum

[Scythe belonging to Charles Thomas White]

Description: Scythe belonging to Charles Thomas White, who founded Richmond Irrigation. b. 1894, d. 1970. Scythe is wooden with two handles, one at the bottom and one in the middle. The blade is attached by a bolted on bracket.
Date: unknown
Partner: Fort Bend Museum

[Black metal covered manual typewriter]

Description: (a) Manual typewriter. Black metal. (b) case cover-black metal with wooden handle. (c) white cloth cover with green stitching. (d) case bottom - wood with metal rod to hold top on.
Date: 1906
Partner: Fort Bend Museum
Back to Top of Screen